STOP AND START SYSTEM CANCEL SWITCH ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (STOP AND START SYSTEM CANCEL SWITCH ASSEMBLY)


    1. for LHD:


      1. B006A3HC01
        B006DHE Install in this Direction

        Attach the claw to install the integration control and panel assembly (stop and start system cancel switch) as shown in the illustration.

    2. for RHD:


      1. B006G7KC01
        B006DHE Install in this Direction

        Attach the claw to install the integration control and panel assembly (stop and start system cancel switch) as shown in the illustration.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY

    Click here

  3. INSTALL INSTRUMENT SIDE PANEL LH (for LHD)

    Click here

  4. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

    Click here