HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

   
   

   1. Engage the guide and install the rear height control sensor sub-assembly with the 3 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the connector.

2. INSTALL REAR WHEEL

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL DECK FLOOR BOX RH

   Click here

5. INSTALL REAR DECK FLOOR BOX

   Click here

6. INSTALL NO. 1 DECK BOARD

   Click here

7. INSTALL NO. 2 DECK BOARD

   Click here

8. INSTALL DECK BOARD ASSEMBLY

   Click here

9. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

   Click here

10. ADJUST HEADLIGHT AIMING

    Click here