FUEL SYSTEM


  1. CONSTRUCTION


    1. A fuel filter assembly consists of a separate filter element and a filter housing.

    2. A paper filter element that offers high filtering efficiency and captures the particles is used.

    3. A fuel filter warning switch is provided in the fuel filter assembly.

    4. A circulating type fuel heater is used.*


      • *: Models with fuel heater

        A01KXL7C01
        *1 Fuel Filter Element Sub-assembly *2 Fuel Sedimenter Level Warning Switch
        *3 Fuel Filter Warning Switch (Vacuum Switch) - -

  2. OPERATION


    1. Warning Light


      1. When the water in the sedimenter section reaches a certain amount, the fuel sedimenter level warning switch comes on, the warning light in the combination meter assembly blinks and the multi buzzer sounds.

      2. A fuel filter warning switch, which turns on or off when the internal vacuum of the filter increases, is provided in the fuel filter. This switch, which turns off when the internal vacuum of the fuel filter increases to a predetermined level, is connected by wire to the combination meter assembly.

        A01KX1GE03

      3. When the combination meter assembly detects that the internal vacuum of the fuel filter has increased (by way of the fuel filter warning switch off signal), it determines that the fuel filter has become clogged. Then, it illuminates the fuel system warning light on the combination meter assembly to urge the driver to replace the fuel filter.

        B0020KRE05

    2. Fuel Heater


      1. The flow of fuel flowing through the circulating type fuel heater is as follows:

        A01KX47E01