INNER REAR VIEW MIRROR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 LANE RECOGNITION COVER (w/ Lane Departure Alert System)


    1. A01OAVWC01
      *a Protective Tape

      Using a screwdriver, disengage the claw and 4 guides to remove the No. 1 lane recognition cover as indicated by the arrows, in the order shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE NO. 2 LANE RECOGNITION COVER (w/ Lane Departure Alert System)


    1. A01ODP4

      Disengage the 2 claws and 2 guides to remove the No. 2 lane recognition cover as shown in the illustration.

  3. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Lane Departure Alert System)


    1. B004G50

      Disengage the 2 guides and slide the inner rear view mirror stay holder cover as shown in the illustration.

    2. B004GC2

      Disengage the 2 claws to remove the inner rear view mirror stay holder cover.

  4. REMOVE INNER REAR VIEW MIRROR ASSEMBLY


    1. B004FND

      Disconnect the connector.

    2. Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror assembly as shown in the illustration.