AMPLIFIER ANTENNA INSTALLATION


  1. INSTALL ANTENNA WITH HOLDER ASSEMBLY (for Single Cab)


    1. A01DYQS

      Attach the 2 claws to install the antenna with holder.

    2. Install the nut.

      Torque:
      4.5 N*m  { 45 kgf*cm, 39 in.*lbf }

    3. Attach the 3 clamps.

      Note

      Make sure the cable of the antenna passes behind pin A.

    4. Connect the connector.

      A01E28CE01

  2. INSTALL ANTENNA WITH HOLDER ASSEMBLY (for Double Cab)


    1. A01DYQS

      Attach the 2 claws to install the antenna with holder.

    2. Install the nut.

      Torque:
      4.5 N*m  { 45 kgf*cm, 39 in.*lbf }

    3. Attach the 3 clamps.

      Note

      Make sure the cable of the antenna passes behind pin A.

    4. Connect the connector.

      A01DW6TE01

  3. INSTALL ROOF HEADLINING ASSEMBLY


    1. for Double Cab:

      Click here

    2. for Single Cab:

      Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.