DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Combination Meter or Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| P-Seatbelt Buckle SW | Front passenger seat belt buckle switch signal/ON or OFF | ON: Front passenger seat belt not fastened OFF: Front passenger seat belt fastened |
- |
| 2nd-Row Seatbelt Buckle (R) | Rear No. 1 seat belt RH buckle switch signal/ON or OFF | ON: Rear No. 1 seat belt RH not fastened OFF: Rear No. 1 seat belt RH fastened |
- |
| 2nd-Row Seatbelt Buckle (L) | Rear No. 1 seat belt LH buckle switch signal/ON or OFF | ON: Rear No. 1 seat belt LH not fastened OFF: Rear No. 1 seat belt LH fastened |
- |
| 2nd-Row Seatbelt Buckle (C) | Rear No. 1 seat belt center buckle switch signal/ON or OFF | ON: Rear No. 1 seat belt center not fastened OFF: Rear No. 1 seat belt center fastened |
- |
| 3rd-Row Seatbelt Buckle (R) | Rear No. 2 seat belt RH buckle switch signal/ON or OFF | ON: Rear No. 2 seat belt RH not fastened OFF: Rear No. 2 seat belt RH fastened |
- |
| 3rd-Row Seatbelt Buckle (L) | Rear No. 2 seat belt LH buckle switch signal/ON or OFF | ON: Rear No. 2 seat belt LH not fastened OFF: Rear No. 2 seat belt LH fastened |
- |
| Driver Side Seatbelt Warning Buzzer | Driver seat belt warning buzzer/ON or OFF | Customized value displayed | - |
| P-Seatbelt Warning Buzzer | Front passenger seat belt warning buzzer/ON or OFF | Customized value displayed | - |
| Rear Seatbelt Warning Buzzer | Rear seat belt warning buzzer/OFF or ON | Customized value displayed | - |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| RR Door Courtesy SW | Rear door courtesy light switch RH/ ON or OFF | ON: Rear door RH or LH open OFF: Rear door RH and LH closed |
- |
| RL Door Courtesy SW | Rear door courtesy light switch LH/ ON or OFF | ON: Rear door LH or RH open OFF: Rear door LH and RH closed |
- |
| D Seat Buckle SW | Driver seat belt buckle switch/ON or OFF | ON: Driver seat belt fastened OFF: Driver seat belt unfastened |
- |
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Combination Meter / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Driver Side Seat Belt | Seat belt warning light | OFF/ON | - |
| Rear Seat Belt | Rear seat belt warning light | OFF/ON | - |