TRANSMISSION CONTROL CABLE REMOVAL

PROCEDURE

  1. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  2. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  3. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  4. REMOVE FRONT CONSOLE BOX

    Click hereClick here

  5. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

    1. Move the shift lever to N.

    2. C203403

      Disconnect the end of the transmission control cable assembly from the shift lever assembly.

    3. C127813C01

      *1

      Stopper

      *2

      Nut

      Pull out the stopper of the transmission control cable assembly.

    4. Rotate the nut of the transmission control cable assembly counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable assembly from the shift lever assembly.

      Note:

      Do not over-rotate the nut as it will come off the internal spring and the transmission control cable assembly will not be reusable.

    5. C207570

      Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

    6. Remove the clip and disconnect the transmission control cable assembly from the control cable bracket.

    7. C127837

      Remove the 2 bolts and disconnect the transmission control cable assembly.

    8. Pull out the transmission control cable assembly to remove it.