DYNAMIC RADAR CRUISE CONTROL SYSTEM


  1. OPERATION


    1. The combination meter assembly has a master warning light, cruise control indicator light (constant speed control mode), cruise control indicator light (vehicle-to-vehicle distance control mode), cruise SET indicator light, multi buzzer, and multi-information display to provide warnings and messages regarding the dynamic radar cruise control system.

    2. The multi-information display displays the set vehicle speed, vehicle ahead mark, and warning message.

    3. Examples are shown below for the illumination or display of each warning light or multi-information display.

      Constant Speed Control Mode
      Condition Multi-information Display Master Warning Light Multi Buzzer
      Being Controlled A01R2CN - -
      System Check A01R25J Illuminates sounds
      Vehicle-to-vehicle Distance Control Mode
      Condition Multi-information Display Master Warning Light Multi Buzzer
      Precaution Display (Displayed for 6 sec. after ON-OFF button has been turned on.) A01R2D4 - -
      Set Standby A01R2FJ A01R216 - -
      Under Constant Speed Control (No Vehicle Ahead, Long) A01R24R - -
      Under Follow-up Control (Vehicle Ahead, Long) A01R2F3 - -
      Under Follow-up Control (The vehicle ahead moves away when the vehicle is being driven at approximately 40 km/h [25 mph] or less.)* A01R23N - -
      The vehicle-to-vehicle distance mark and vehicle ahead mark blinks
      Approach warning (Vehicle Ahead) A01R1YP - -
      The display frame, vehicle-to-vehicle distance mark and vehicle ahead mark blinks and the skid control buzzer sounds.
      Stop Retention Control* A01R2O7 - -
      Start Control* A01R1WS - -
      Millimeter wave radar sensor assembly is dirty A01R2B8 Illuminates sounds

      • Poor Weather Conditions

      • A Malfunction in the forward recognition camera

      • Misalignment of the axis of the millimeter wave radar sensor assembly

      • The forward recognition camera is temporarily unavailable

      • A system check is being performed after the engine has started

      		 A01R1WE Illuminates sounds
      System Check A01R25J Illuminates sounds
      System Check During Stop Retention Control* A01R2HH Illuminates sounds
      The skid control buzzer sounds until the brake pedal is depressed.

      When any problem occurs during stop retention control, or any of the following conditions is met:


      • The driver seat belt is unfastened

      • The driver door is opened

      • The engine hood or luggage compartment door is opened

      • The vehicle is parked for a long period of time

      • The vehicle is driving on a steep hill

      • A preceding vehicle is not detected

      		 A01R1Z1 - -
      The skid control buzzer sounds until the brake pedal is depressed.

      *: Models with full-speed range following function