REAR SEATBACK HEATER(for 60/40 Split Slide Walk-in Seat Type RH Side) INSPECTION

PROCEDURE

  1. INSPECT REAR SEATBACK HEATER ASSEMBLY

    B241817C01

    *a

    Component without harness connected

    (Rear Seatback Heater Assembly)

    1. Check the seatback heater.

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        1 - 2

        Seatback heater temperature 20°C (68°F)

        7.4 to 9.0 Ω

        If the result is not as specified, replace the seatback heater assembly.