ACCELERATOR PEDAL REMOVAL

PROCEDURE

  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note:

    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

    1. for LHD:

      1. A321703

        Disconnect the accelerator pedal sensor assembly connector.

      2. Remove the 3 bolts and accelerator pedal sensor assembly.

        Note:

        If the accelerator pedal sensor assembly has been struck or dropped, replace it.

    2. for RHD:

      1. A321704

        Disconnect the accelerator pedal sensor assembly connector.

      2. Remove the 2 nuts and accelerator pedal sensor assembly.

        Note:

        If the accelerator pedal sensor assembly has been struck or dropped, replace it.