FRONT DIFFERENTIAL OIL SEAL(for RH Side) REPLACEMENT

PROCEDURE

1. REMOVE TRANSFER ASSEMBLY

   Click here

2. REMOVE FRONT DRIVE SHAFT OIL SEAL RH

   1. 

      *a	Protective Tape

      Using a screwdriver with protective tape wound around the tip, pry out the front drive shaft oil seal RH.

      Note:

      Do not damage the continuously variable transaxle assembly.

3. REMOVE CVT TYPE T OIL SEAL

   

   1. Using SST, remove the CVT type T oil seal from the continuously variable transaxle assembly.

      09308-00010

      Note:

      Do not damage the continuously variable transaxle assembly.

4. INSTALL CVT TYPE T OIL SEAL

   1. Apply MP grease to the lip of a new CVT type T oil seal.

   2. 

      *a	21.5 to 22.5 mm (0.847 to 0.885 in.)

      Using SST and a hammer, install the CVT type T oil seal to the continuously variable transaxle assembly.

      09950-60010

      09951-00390

      09950-70010

      09951-07200

      Standard depth

      21.5 to 22.5 mm (0.847 to 0.885 in.)

      Note:

      Make sure to install the front drive shaft oil seal RH as specified, otherwise malfunctions such as a fluid leak will occur.

5. INSTALL FRONT DRIVE SHAFT OIL SEAL RH

   1. Apply MP grease to the lip of a new front drive shaft oil seal RH.

   2. 

      *a	5.5 to 6.5 mm (0.217 to 0.255 in.)

      Using SST and a hammer, install the front drive shaft oil seal RH to the continuously variable transaxle assembly.

      09515-87302

      Standard depth

      5.5 to 6.5 mm (0.217 to 0.255 in.)

      Note:

      • Be sure to install the front drive shaft oil seal RH in the correct direction.

      • Make sure to install the front drive shaft oil seal RH as specified, otherwise malfunctions such as a fluid leak will occur.

      • Do not damage the lip of the front drive shaft oil seal RH.

6. INSTALL TRANSFER ASSEMBLY

   Click here