DRIVE BELT REMOVAL


  1. REMOVE DRIVE BELT


    1. A01DZJYE01

      Use the hexagon-shaped part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the drive belt. Then remove the drive belt.

      Note

      When removing the drive belt, do not use the idle pulley's bolt.

      Tech Tips

      After removing the drive belt, move the tensioner upward to the maximum amount.

  2. REMOVE TENSIONER PULLEY

    Note

    Perform the following procedure when it is necessary to replace the tensioner pulley.


    1. Remove the oil dipstick.

    2. Remove the bolt, dipstick guide and O-ring.

      Tech Tips

      Cover the dipstick guide hole to prevent foreign matter from entering it.

    3. A01DWSYE06

      Remove the bolt, dust seal, tensioner pulley and nut.

      Note

      Do not drop the nut.