LIGHTING SYSTEM DATA LIST / ACTIVE TEST
DATA LIST
Note:In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Tip:Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List / All Data.
According to the display on the GTS, read the Data List.
Body Electrical > Main Body > Data List
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
ACC SW
Ignition switch ACC signal
ON or OFF
ON: Ignition switch ACC
OFF: Ignition switch off
"ON" is also displayed for this item when the ignition switch is ON.
IG SW
Ignition switch ON signal
ON or OFF
ON: Ignition switch ON
OFF: Ignition switch off
"OFF" is also displayed for this item when the ignition switch is ACC.
RR Door Courtesy SW
Rear door courtesy light switch RH signal
ON or OFF
ON: Rear door RH open
OFF: Rear door RH closed
-
RL Door Courtesy SW
Rear door courtesy light switch LH signal
ON or OFF
ON: Rear door LH open
OFF: Rear door LH closed
-
Back Door Courtesy SW
Back door courtesy light switch signal
ON or OFF
ON: Back door open
OFF: Back door closed
-
FR Door Lock Pos
Front door unlock detection switch RH signal
UNLOCK or LOCK
UNLOCK: Front door RH unlocked
LOCK: Front door RH locked
-
FR Door Courtesy SW
Front door courtesy light switch RH signal
ON or OFF
ON: Front door RH open
OFF: Front door RH closed
-
FL Door Lock Pos
Front door unlock detection switch LH signal
UNLOCK or LOCK
UNLOCK: Front door LH unlocked
LOCK: Front door LH locked
-
FL Door Courtesy SW
Front door courtesy light switch LH signal
ON or OFF
ON: Front door LH open
OFF: Front door LH closed
-
RR-Door Lock Pos SW
LH and RH side rear door unlock detection switch signal
ON or OFF
ON: LH or RH side rear door unlocked
OFF: LH and RH side rear door locked
w/ Entry and Start System or Theft Deterrent System
RL-Door Lock Pos SW
LH and RH side rear door unlock detection switch signal
ON or OFF
ON: LH or RH side rear door unlocked
OFF: LH and RH side rear door locked
w/ Entry and Start System or Theft Deterrent System
Interior Light Control
Function which controls interior lights
ON or OFF
Customized setting displayed
Vehicles displaying the Item "Interior Light Control" on the GTS.
I/L ON W/Door Key Unlock
Function which turns on interior lights when door is unlocked
ON or OFF
Customized setting displayed
-
Lighting Time
Lighting time after closing all doors
7.5 s, 15 s or 30 s
Customized setting displayed
-
Room Light when Aprchd
Function which turns on room lights when key is brought within vehicle exterior detection area
ON or OFF
Customized setting displayed
w/ Entry and Start System
Inside Foot Light
Changes the interior footwell lights control.
ON or OFF
Customized setting displayed
w/ Footwell Light
I/L when ACC OFF
Function which turns on lights when ignition switch is turned from ON or ACC to off
ON or OFF
Customized setting displayed
-
Light Control
Function that lights up the ambient lights.
ON or OFF
Customized setting displayed
Although the item is displayed on the GTS, it is not applicable to this vehicle.
Vehicles displaying the Item "Light Control" on the GTS.
ACTIVE TEST
Tip:Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / (desired system) / Active Test.
According to the display on the GTS, perform the Active Test.
Body Electrical > Main Body > Active Test
Tester Display
Measurement Item
Control Range
Diagnostic Note
Illuminated Entry System
Map light, ignition key cylinder light (w/o Entry and Start System) and No. 1 room light
ON or OFF
Turn the map light switch and No. 1 room light switch to the DOOR position.
Fr Foot Light
Footwell light
ON or OFF
w/ Footwell Light
Relay for Interior Light Auto Cut Function
DOME CUT relay
ON or OFF
-
Body Electrical > Entry&Start > Active Test
Tester Display
Measurement Item
Control Range
Diagnostic Note
Power/Engine SW Light
Engine switch Illumination
ON or OFF
w/ Entry and Start System