REAR SEAT OUTER BELT ASSEMBLY(for Hatchback) REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The procedure described below is for the LH side.

PROCEDURE

  1. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

    Click hereClick here

  2. REMOVE REAR FLOOR MAT ASSEMBLY

    Click hereClick here

  3. REMOVE REAR DECK FLOOR BOX (w/ Deck Floor Box)

    Click hereClick here

  4. REMOVE DECK FLOOR BOX LH (w/ Deck Floor Box)

    Click hereClick here

  5. REMOVE DECK FLOOR BOX RH (w/ Deck Floor Box)

    Click hereClick here

  6. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click hereClick here

  7. REMOVE REAR DECK TRIM COVER

    Click hereClick here

  8. REMOVE REAR SEAT ASSEMBLY

  9. REMOVE REAR DOOR SCUFF PLATE

    Click hereClick here

  10. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

    Click hereClick here

  11. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY

    Click hereClick here

  12. REMOVE REAR SEAT SIDE GARNISH

    Click hereClick here

  13. REMOVE NO. 2 DECK SIDE TRIM HOOK

    Click hereClick here

  14. REMOVE LOWER DECK TRIM SIDE BOARD (w/ Deck Board)

    Click hereClick here

  15. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)

    Click hereClick here

  16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)

    Click hereClick here

  17. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    1. B333864

      Remove the bolt and disconnect the floor anchor of the rear seat 3 point type outer belt assembly.

    2. B333865

      Remove the nut.

    3. Disengage the guide to remove the rear seat 3 point type outer belt assembly.