COMBINATION METER(for Hatchback, Wagon) INSTALLATION

PROCEDURE

1. INSTALL COMBINATION METER ASSEMBLY

   1. Connect each connector.

   2. 

      Engage the 2 clips as shown in the illustration.

   3. Install the combination meter assembly with the 2 screws.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click hereClick here

3. INSTALL NO. 1 METER HOOD CLUSTER

   Click hereClick here

4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click hereClick here

5. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click hereClick here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick hereClick hereClick hereClick hereClick here