REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. A005BZYE06
      Text in Illustration
      *a

      Component without harness connected

      (Rear Combination Light Assembly LH)

      Remove the rear combination light assembly LH.

    2. Apply battery voltage to the rear combination light assembly LH and check that the lights come on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 4 (B)

      Auxiliary battery negative (-) → Terminal 5 (E)

      		 Stop light comes on

      Auxiliary battery positive (+) → Terminal 2 (B)

      Auxiliary battery negative (-) → Terminal 5 (E)

      		 Taillight comes on

      Auxiliary battery positive (+) → Terminal 6 (B)

      Auxiliary battery negative (-) → Terminal 5 (E)

      		 Turn signal light comes on

      If the result is not as specified, repair or replace the rear combination light socket and wire sub-assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. A005BZYE06
      Text in Illustration
      *a

      Component without harness connected

      (Rear Combination Light Assembly RH)

      Remove the rear combination light assembly RH.

    2. Apply battery voltage to the rear combination light assembly RH and check that the lights come on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 4 (B)

      Auxiliary battery negative (-) → Terminal 5 (E)

      		 Stop light comes on

      Auxiliary battery positive (+) → Terminal 2 (B)

      Auxiliary battery negative (-) → Terminal 5 (E)

      		 Taillight comes on

      Auxiliary battery positive (+) → Terminal 6 (B)

      Auxiliary battery negative (-) → Terminal 5 (E)

      		 Turn signal light comes on

      If the result is not as specified, repair or replace the rear combination light socket and wire sub-assembly RH.