AIR FUEL RATIO SENSOR INSTALLATION


  1. INSTALL AIR FUEL RATIO SENSOR

    A01DUZXE01
    Text in Illustration
    *1 Fulcrum Length

    1. Using SST, install the air fuel ratio sensor to the front exhaust pipe.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips


      • Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). When using a torque wrench with a fulcrum length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

      • Make sure SST and the wrench are connected in a straight line.

    2. for 4WD:

      Connect the air fuel ratio sensor connector.

    3. for Pre-Runner:

      Connect the air fuel ratio sensor connector and attach the clamp.

  2. PERFORM AIR FUEL RATIO SENSOR COMPENSATION RESET

    Click here