BACK DOOR CLOSER SYSTEM DATA LIST / ACTIVE TEST

  1. DATA LIST

    Tip:

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note:

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Back Door, Main Body or Smart Key / Data List.

    5. According to the display on the GTS, read the Data List.

      Body Electrical > Back Door > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      Door Lock Status

      Back door condition signal

      Lock or Unlock

      Lock: Back door locked

      Unlock: Back door unlocked

      -

      Half Latch SW

      Latch switch signal

      ON or OFF

      ON: Back door lock motor open-latched

      OFF: Back door lock motor full-latched or half-latched

      *: Refer to "CONSTRUCTION AND OPERATION"

      Closer Position SW

      Sector switch signal

      ON or OFF

      ON: Back door lock center gear in center position

      OFF: Back door lock center gear not in center position

      *: Refer to "CONSTRUCTION AND OPERATION"

      Pawl Position Switch

      Pawl switch signal

      ON or OFF

      ON: Back door lock (pawl switch) on

      OFF: Back door lock (pawl switch) off

      *: Refer to "CONSTRUCTION AND OPERATION"

      Courtesy SW

      Back door courtesy switch signal

      ON or OFF

      ON: Back door open

      OFF: Back door closed

      *: Refer to "CONSTRUCTION AND OPERATION"

      IG SW

      Ignition switch signal

      ON or OFF

      ON: Power switch on (IG).

      OFF: Power switch off

      "OFF" is also displayed for this item when the power switch is on (ACC).

      #Codes

      The number of DTCs

      Min.: 0

      Max.: 255

      The number of DTCs

      -

      *: Refer to "CONSTRUCTION AND OPERATION"

      Click here

      Body Electrical > Main Body > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      Back Door Courtesy SW

      Back door courtesy switch signal

      ON or OFF

      ON: Back door open

      OFF: Back door closed

      -

      Back Door Open

      Back door condition signal

      Permit or Prohibit

      Permit: Back door unlocked

      Prohibit: Back door locked

      -

      Back Door Open Handle SW

      Back door opener switch assembly signal

      ON or OFF

      ON: Back door opener switch assembly on

      OFF: Back door opener switch assembly off

      -

      Body Electrical > Smart Key > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      Tr/B-Door Lock SW

      Back door opener switch assembly signal

      ON or OFF

      ON: Back door opener switch assembly on

      OFF: Back door opener switch assembly off

      -