FUEL INJECTOR REMOVAL

PROCEDURE

  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click hereClick hereClick hereClick hereClick here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick hereClick hereClick here

  4. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click hereClick here

  7. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    Click hereClick hereClick hereClick hereClick hereClick here

  8. REMOVE BATTERY

  9. REMOVE BATTERY TRAY

  10. DISCONNECT ENGINE WIRE

    Click hereClick here

  11. REMOVE AIR TUBE

    Click hereClick here

  12. REMOVE WIRE HARNESS CLAMP BRACKET

    1. A205213

      Remove the 2 nuts and wire harness clamp bracket.

  13. DISCONNECT FUEL TUBE SUB-ASSEMBLY

    1. A298977

      Remove the No. 2 fuel pipe clamp and disconnect the fuel tube sub-assembly.

      Click here

  14. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY

    1. A152570

      Remove the bolt and wire harness bracket.

    2. A153007

      Remove the 2 bolts.

    3. A205216

      Remove the bolt and fuel delivery pipe sub-assembly.

      Note:

      Be careful not to drop the fuel injectors when removing the fuel delivery pipe sub-assembly.

    4. A153008

      Remove the 2 No. 1 delivery pipe spacers.

  15. REMOVE FUEL INJECTOR ASSEMBLY

    1. A153009

      Pull the 4 fuel injector assemblies out of the fuel delivery pipe sub-assembly.

    2. Remove the O-ring from the fuel injector assembly.

    3. A171499

      For reinstallation, attach a tag or label to the injector shaft.

      Note:

      Prevent entry of foreign objects by covering the fuel injector assembly with plastic bags.

    4. Remove the 4 injector vibration insulators from the cylinder head.