WASHER NOZZLE ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT WASHER NOZZLE SUB-ASSEMBLY (for RHD)

   
   

   1. With the engine running, check the position where the windshield washer fluid hits the windshield.

      Standard
      The washer fluid hits the windshield in the areas shown in the illustration.

      

      Standard Clearance

      Area	Measurement	Area	Measurement
      a	684 mm (26.929 in.)	b	660 mm (25.984 in.)
      c	232 mm (9.134 in.)	d	247 mm (9.724 in.)
      e	250 mm (9.843 in.)	f	268 mm (10.551 in.)
      g	299 mm (11.772 in.)	h	253 mm (9.961 in.)
      i	250 mm (9.843 in.)	j	300 mm (11.811 in.)

      Tech Tips

      If the result is not as specified, adjust the washer nozzle sub-assembly Click here.

2. INSPECT WASHER NOZZLE SUB-ASSEMBLY (for LHD)

   
   

   1. With the engine running, check the position where the windshield washer fluid hits the windshield.

      Standard
      The washer fluid hits the windshield in the areas shown in the illustration.

      

      Standard Clearance

      Area	Measurement	Area	Measurement
      a	660 mm (25.984 in.)	b	684 mm (26.929 in.)
      c	247 mm (9.724 in.)	d	232 mm (9.134 in.)
      e	268 mm (10.551 in.)	f	250 mm (9.843 in.)
      g	253 mm (9.961 in.)	h	299 mm (11.772 in.)
      i	300 mm (11.811 in.)	j	250 mm (9.843 in.)

      Tech Tips

      If the result is not as specified, adjust the washer nozzle sub-assembly Click here.