FRONT SEAT CUSHION HEATER (w/ Front Seat Side Airbag) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH

    A01DXLWE01
    Text in Illustration
    *1 Tack Pin
    *2 Separate Type Front Seat Cushion Cover
    *3 Front Seat Cushion Heater Assembly LH

    1. Set the front seat cushion heater on the separate type front seat cushion cover.

    2. Using a tacker, install the front seat cushion heater to the separate type front seat cushion cover with 12 new tack pins as shown in the illustration.

      Note

      Do not substitute other metal parts for tack pins.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01DVA7E02
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. Attach the hooks to install the separate type front seat cushion cover with pad to the front seat cushion frame sub-assembly LH.

    3. A01DYBN

      Bend the 2 front seat cushion frame claws downward.

    4. A01DZH6E01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, attach the separate type front seat cushion cover to the front seat cushion frame sub-assembly LH with new hog rings.

    5. A01E051

      for Front Passenger Side, w/ Seat Belt Warning System:

      Attach the wire harness clamp.

    6. A01E0VU

      for LHD, w/ Seat Heater System:

      Attach the 3 front seat cushion heater assembly LH wire harness clamps.

  3. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. Install the separate type front seatback assembly with the 4 bolts.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }
    2. A01DWDZ

      for LHD, w/ Seat Heater System:

      Connect the front seatback heater assembly LH connector.

    3. A01E1FYE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, attach the separate type front seat cushion cover and rubber bands of the separate type front seatback cover to the front seat cushion frame sub-assembly LH with new hog rings.

    4. A01E0QC

      Attach the 3 front seat airbag wire harness clamps.

  4. INSTALL SEATBACK SPRING LH


    1. A01DXBM

      Install the seatback spring LH.

  5. INSTALL FRONT SEAT CUSHION SHIELD LH

    A01E2XOE01
    Text in Illustration
    *1 Guide
    *2 Hook

    1. Attach the guide and 2 hooks in the order shown in the illustration to install the front seat cushion shield LH.

    2. Install the 2 screws.

  6. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01DVLF

      Attach the claw to install the reclining adjuster release handle LH.

  7. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    A01E1X9E01

    1. Attach the 2 hooks in the order shown in the illustration to install the front seat inner cushion shield LH.

    2. Install the 2 screws.

  8. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  9. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  10. INSTALL FRONT SEAT ASSEMBLY

    Click here

  11. CHECK SRS WARNING LIGHT

    Click here

  12. INSPECT FRONT SEAT ASSEMBLY


    1. Check the seat heater operation.


      1. Turn the ignition switch to ON.

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.