ULTRASONIC SENSOR(for Rear) INSPECTION

PROCEDURE


  1. INSPECT NO. 3 ULTRASONIC SENSOR


    1. A01HI7TC01
      *a

      Component without harness connected

      (No. 3 Ultrasonic Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 20 to 40 kΩ

      If the result is not as specified, replace the No. 3 ultrasonic sensor.

  2. INSPECT NO. 4 ULTRASONIC SENSOR


    1. A01HI7TC01
      *a

      Component without harness connected

      (No. 4 Ultrasonic Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 20 to 40 kΩ

      If the result is not as specified, replace the No. 4 ultrasonic sensor.