HEADLIGHT LEVELING ECU REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click hereClick hereClick hereClick hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick hereClick hereClick here

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click hereClick here

  4. REMOVE LOWER INSTRUMENT PANEL

    Click hereClick hereClick here

  5. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY

    E269027

    1. Disconnect the connector.

    2. Remove the bolt and headlight leveling ECU assembly.