NAME PLATE(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

Tip:

When removing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Table 1. Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

Name Plate or Emblem

20 to 30°C (68 to 86°F)
Note:

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE

  1. REMOVE SYMBOL EMBLEM

    1. B350741C01

      *a

      Wooden Block

      *b

      Piano Wire
      V100155

      Protective Tape

      Apply protective tape around the symbol emblem as shown in the illustration.

    2. Insert a piano wire between the vehicle body and symbol emblem.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire to separate the double-sided tape that holds the symbol emblem to the vehicle body.

      Note:

      Be careful not to damage the vehicle body.

    5. Disengage the 2 pins and remove the symbol emblem.

  2. REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE

    1. B350742C01

      *a

      Wooden Block

      *b

      Piano Wire
      V100155

      Protective Tape

      Apply protective tape around the No. 1 luggage compartment door name plate as shown in the illustration.

    2. Insert a piano wire between the vehicle body and No. 1 luggage compartment door name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire to separate the double-sided tape that holds the No. 1 luggage compartment door name plate to the vehicle body.

      Note:

      Be careful not to damage the vehicle body.

    5. Remove the No. 1 luggage compartment door name plate.

  3. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

    1. B350743C01

      *a

      Wooden Block

      *b

      Piano Wire
      V100155

      Protective Tape

      Apply protective tape around the No. 2 luggage compartment door name plate as shown in the illustration.

    2. Insert a piano wire between the vehicle body and No. 2 luggage compartment door name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire to separate the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.

      Note:

      Be careful not to damage the vehicle body.

    5. Remove the No. 2 luggage compartment door name plate.

  4. REMOVE NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE

    1. B350744C01

      *a

      Wooden Block

      *b

      Piano Wire
      V100155

      Protective Tape

      Apply protective tape around the No. 7 luggage compartment door name plate as shown in the illustration.

    2. Insert a piano wire between the vehicle body and No. 7 luggage compartment door name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire to separate the double-sided tape that holds the No. 7 luggage compartment door name plate to the vehicle body.

      Note:

      Be careful not to damage the vehicle body.

    5. Remove the No. 7 luggage compartment door name plate.