POWER BACK DOOR CONTROL SWITCH(for LHD) REMOVAL

PROCEDURE

  1. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click hereClick here

  2. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click hereClick here

  3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click hereClick here

  4. REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click hereClick here

  5. REMOVE FUSE BOX OPENING COVER

    Click hereClick hereClick here

  6. REMOVE NO. 2 SWITCH HOLE BASE

    1. B337834

      Detach the 3 clips and claw and remove the No. 2 switch hole base.

  7. REMOVE BACK DOOR CONTROL SWITCH

    1. B336654

      Detach the 2 claws and remove the back door control switch assembly as shown in the illustration.

    2. B338188

      Disconnect the connector.