DRIVE BELT REMOVAL

PROCEDURE

  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click hereClick here

  2. REMOVE REAR ENGINE UNDER COVER RH

    1. A299168

      Remove the 2 clips and rear engine under cover RH.

  3. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH

    1. A295895

      Remove the 4 bolts and front suspension member reinforcement RH.

  4. REMOVE FAN AND GENERATOR V BELT

    1. A214114N01

      Using SST and a 22 mm wrench, rotate the tensioner pulley counterclockwise to loosen the belt tension. Then remove the fan and generator V belt.

      09216-42010

      CAUTION:

      • Be careful as the wrench only fits loosely on the V-rebbed belt tensioner assembly tool set point. The wrench may come off the set point and cause injuries.

      • Be careful that your hands do not become jammed between parts such as the fan and generator V belt, pulleys, etc.

      Note:

      Make sure SST is installed as shown in the illustration. If not, SST and/or the fan and generator V belt may not be able to be removed.