TRANSFER CASE FRONT OIL SEAL(for LH Side) REPLACEMENT

PROCEDURE

1. REMOVE TRANSFER ASSEMBLY

   Click here

2. REMOVE TRANSFER AND TRANSAXLE SETTING STUD BOLT

   • for Transfer Side: (Click hereClick here)

   • for Transaxle Side (U660F): (Click here)

   • for Transaxle Side (U760F): (Click here)

   • for Transaxle Side (EA64F): (Click hereClick here)

   • for Transaxle Side (EB61F): (Click here)

   • for Transaxle Side (EB63F): (Click here)

   • for Transaxle Side (K111F): (Click here)

3. SECURE TRANSFER ASSEMBLY

   Click hereClick here

4. REMOVE TRANSFER CASE OIL SEAL

   1. 

      *A	for CVT
      *B	for Automatic Transaxle and Manual Transaxle
      *1	Transfer Case Oil Seal

      Using SST, remove the transfer case oil seal from the transfer case.

      09308-00010

      Note:

      Do not scratch the press-fitting surface of the transfer case oil seal.

5. INSTALL TRANSFER CASE OIL SEAL

   1. Using SST and a hammer, tap in a new transfer case oil seal as shown in the illustration.

      

      *A	for CVT	*B	for Automatic Transaxle and Manual Transaxle
      *1	Transfer Case Oil Seal	-	-

      09316-60011

      09316-00011

      Drive in depth (A)

      9.5 to 10.5 mm (0.375 to 0.413 in.)

      Note:

      • Tap the transfer case oil seal uniformly so that the transfer case oil seal is straight.

      • Do not tap the transfer case oil seal in too far.

6. REMOVE TRANSFER ASSEMBLY

   Click hereClick here

7. INSTALL TRANSFER AND TRANSAXLE SETTING STUD BOLT

   • for Transfer Side: (Click hereClick here)

   • for Transaxle Side (U660F): (Click here)

   • for Transaxle Side (U760F): (Click here)

   • for Transaxle Side (EA64F): (Click hereClick here)

   • for Transaxle Side (EB61F): (Click here)

   • for Transaxle Side (EB63F): (Click here)

   • for Transaxle Side (K111F): (Click here)

8. INSTALL TRANSFER ASSEMBLY

   Click here