STEREO JACK ADAPTER ASSEMBLY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  4. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  5. REMOVE NO. 3 BOX PANEL

    Click here

  6. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

  7. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

  8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  9. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  10. REMOVE BOX BOTTOM PANEL

    Click here

  11. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


    1. A004P5A

      Detach the 2 claws and remove the No. 1 stereo jack adapter assembly.