HYBRID BATTERY SYSTEM PROBLEM SYMPTOMS TABLE

Table 1. Hybrid Battery System

Symptom

Suspected Area

Link

"Maintenance required for hybrid battery cooling parts at your dealer" is displayed on the multi-information display*

1. Make sure the air intake port is not blocked.

-

2. Make sure there are no gaps between the connecting parts of the ducts.

-

3. Clean the filter of the No. 2 or No. 3 battery service cover board.

Click here

4. Clean the No. 1 or No. 2 hybrid battery intake duct.

Check for entry of foreign matter.

Click here

5. Clear the DTCs to reset the learning values even if no DTCs are stored.

Click here

Abnormal sound is heard from the area around the No. 1 hybrid battery intake duct or No. 2 hybrid battery intake duct

1. Make sure the air intake port is not blocked.

-

2. Make sure there are no gaps between the connecting parts of the ducts.

-

3. Clean the filter of the No. 2 or No. 3 battery service cover board.

Click here

4. Clean the No. 1 or No. 2 hybrid battery intake duct.

Check for entry of foreign matter.

Click here

*: If the battery cooling blower assembly malfunctions, DTC P0A82-123, P0A84-123, P0A85-123, P0A97-123, P0A99-123 or P0A9A-123 will be stored. If only "Maintenance required for hybrid battery cooling parts at your dealer" is displayed on the multi-information display, only perform the inspection of the HV battery cooling system intake port, filter and duct.