SEAT BELT WARNING LIGHT(for Rear Side) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

   
   

   1. Connect the connector.

   2. Attach the 6 clips to install the air conditioning control assembly.

2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

4. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

5. INSTALL NO. 1 SWITCH HOLE BASE

   Click here

6. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

7. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

8. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

9. INSTALL INSTRUMENT SIDE PANEL LH

   Click here

10. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

11. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

12. INSTALL UPPER REAR CONSOLE PANEL

    Click here

13. INSTALL CONSOLE ARMREST ASSEMBLY

    Click here

14. INSTALL COWL SIDE TRIM BOARD LH

    Click here

15. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here

16. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here