CRUISE CONTROL MAIN SWITCH INSPECTION

PROCEDURE

  1. INSPECT CRUISE CONTROL MAIN SWITCH

    1. Measure the resistance according to the value(s) in the table below.

      E265511C01

      *1

      Cruise Control Switch (ON-OFF button)

      -

      -

      *a

      Component without harness connected

      (Cruise Control Main Switch (Cruise Control Switch))

      *b

      ON-OFF

      *c

      +/RES

      *d

      -/SET

      *e

      CANCEL

      -

      -

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1 - 3

      Cruise control switch (ON-OFF button) released

      1 MΩ or higher

      Cruise control switch (ON-OFF button) pushed

      Below 2.5 Ω

      +/RES

      235 to 245 Ω

      -/SET

      617 to 643 Ω

      CANCEL

      1509 to 1571 Ω