GLOW PLUG INSPECTION


  1. CHECK GLOW PLUG

    A01DWQAE01

    1. Remove the screw grommet.

    2. Measure the resistance of the glow plug.

      Standard resistance
      Tester Connection Specified Condition
      Glow plug terminal - Body ground Approx. 0.95 Ω at 20°C (68°F)

      • If the result is not as specified, replace the glow plug.

      Note


      • Be careful not to damage the glow plug pipes, as this may cause an open circuit or shorten the life of the glow plugs.

      • Do not allow oil or gasoline to contact the glow plug when cleaning it.

      • Clean any oil on the terminal and bakelite washer with a dry cloth.

      • Do not apply more than 11 V to the glow plug, as this may cause an open circuit.