FUEL PRESSURE REGULATOR(w/ Canister Pump Module) INSTALLATION

CAUTION / NOTICE / HINT

Note:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click here

PROCEDURE

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

    1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.

    2. Install the fuel pressure regulator assembly.

  2. INSTALL FUEL PUMP

    Click here

  3. INSTALL NO. 1 FUEL SUCTION SUPPORT

    Click here

  4. INSTALL NO. 1 FUEL SUB-TANK

    Click here

  5. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP

    Click here