ECM INSTALLATION

PROCEDURE

1. INSTALL NO. 2 ECM BRACKET

   1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

2. INSTALL NO. 1 ECM BRACKET

   1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

3. INSTALL ECM

   1. Install the ECM with the 2 bolts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

      Note:

      If the ECM has been struck or dropped, replace it.

   2. 

      *A	for LHD
      *B	for RHD

      Engage the wire harness clamp. (for LHD)

   3. Connect the 2 ECM connectors and lower the 2 levers.

      Note:

      • When connecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors.

      • Be sure to securely connect the ECM connectors.

4. INSTALL BATTERY CLAMP SUB-ASSEMBLY (for RHD)

   Click hereClick here

5. INSTALL BATTERY (for RHD)

   Click hereClick here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick here

7. PERFORM INITIALIZATION

   Click hereClick here