WASHER NOZZLE(for Rear Side) ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT REAR WASHER NOZZLE

    1. Operate the rear washer nozzle and check the position that the washer fluid hits the windshield.

      Standard

      Washer fluid hits the windshield in the area shown in the illustration.

      E265026C01

      *a

      Vehicle center line

      *b

      End of back door glass
      V100155

      Measurement

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      48.3 mm (1.90 in.)

      B

      11.9 mm (0.469 in.)

      C

      48.3 mm (1.90 in.)

      D

      9.6 mm (0.378 in.)

      E

      3.2 mm (0.126 in.)

      F

      5.6 mm (0.220 in.)

      G

      75.8 mm (2.98 in.)

      H

      99 mm (3.90 in.)
      Tip:

      If the result is not as specified, replace the rear washer nozzle.