ROOF SUNSHADE INSTALLATION

PROCEDURE

1. INSTALL SLIDING ROOF HOUSING ASSEMBLY

   1. Install the sliding roof housing assembly with the 4 bolts and 6 nuts.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

   2. Engage the 3 clamps.

2. INSTALL REAR NO. 2 SIDE RAIL SPACER LH

   1. Engage the 2 claws to install the rear No. 2 side rail spacer LH.

3. INSTALL REAR NO. 2 SIDE RAIL SPACER RH

   Tip:

   Use the same procedure as for the LH side.

4. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH

   Click hereClick here

5. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY RH

   Tip:

   Use the same procedure as for the LH side.

6. RESET SLIDING ROOF DRIVE GEAR ASSEMBLY

   Click here

7. CHECK ROOF SUNSHADE SYSTEM

   Click here