REAR SEAT OUTER BELT ASSEMBLY(for Hatchback) INSTALLATION

CAUTION / NOTICE / HINT

Tip:
  • Use the same procedure for the RH side and LH side.

  • The procedure described below is for the LH side.

PROCEDURE

  1. INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

  2. INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    1. Engage the guide.

    2. Install the rear seat 3 point type outer belt assembly with the nut.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

    3. Connect the floor anchor of the rear seat 3 point type outer belt assembly with the bolt.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

    4. Check if the ELR locks.

      Note:

      The check should be performed with the rear seat 3 point type outer belt assembly installed.

      1. With the rear seat 3 point type outer belt assembly installed, check that the belt locks when it is pulled out quickly.

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)

  4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)

  5. INSTALL LOWER DECK TRIM SIDE BOARD (w/ Deck Board)

  6. INSTALL NO. 2 DECK SIDE TRIM HOOK

  7. INSTALL REAR SEAT SIDE GARNISH

  8. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

  9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

    for LH Side:Click hereClick here

    for RH Side:Click hereClick here

  10. INSTALL REAR DOOR SCUFF PLATE

  11. INSTALL REAR SEAT ASSEMBLY

  12. INSTALL REAR DECK TRIM COVER

  13. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

  14. INSTALL DECK FLOOR BOX RH (w/ Deck Floor Box)

  15. INSTALL DECK FLOOR BOX LH (w/ Deck Floor Box)

  16. INSTALL REAR DECK FLOOR BOX (w/ Deck Floor Box)

  17. INSTALL REAR FLOOR MAT ASSEMBLY

  18. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)