AIR FUEL RATIO SENSOR(w/o Glow Plug Controller) INSPECTION

PROCEDURE

  1. INSPECT AIR FUEL RATIO SENSOR

    1. A200331C05

      *a

      Component without harness connected

      (Air Fuel Ratio Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      5 (H-) - 2 (+B)

      20°C (68°F)

      2 to 5 Ω

      5 (H-) - 4 (AF1+)

      Always

      10 kΩ or higher

      If the result is not as specified, replace the air fuel ratio sensor.