AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) CD Sound Skips

PROCEDURE

1. CHECK CD

   1. 

      Check that the CD is not deformed or cracked.

      OK

      No deformation or cracks on the CD

   Result

   Proceed to
   OK
   NG

   NG

   END (CD IS FAULTY)

   OK

2. CHECK CD

   1. 

      Check the CD.

      OK

      The CD is clean.

      Note:

      Do not use a conventional record cleaner or anti-static preservative.

      Tip:

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   Result

   Proceed to
   OK
   NG

   NG

   CLEAN CD

   OK

3. REPLACE CD AND RECHECK

   1. Replace the CD with a known good one and recheck that the malfunction disappears.

      OK

      Malfunction disappears.

   Result

   Proceed to
   OK
   NG

   OK

   END (CD WAS FAULTY)

   NG

4. CHECK RADIO RECEIVER ASSEMBLY

   1. Check the radio receiver assembly installation condition.

      1. Check that the radio receiver assembly is properly installed.

         OK

         Radio receiver assembly is properly installed.

   Result

   Proceed to
   OK
   NG

   OK

   REPLACE RADIO RECEIVER ASSEMBLY

   for Sedan:Click hereClick here

   for Hatchback, Wagon:Click hereClick here

   NG

   REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY

   for Sedan:Click hereClick here

   for Hatchback, Wagon:Click hereClick here