STEREO JACK ADAPTER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY

   
   

   1. 

      Attach the 2 claws to install the stereo jack adapter.

2. INSTALL BOX BOTTOM PANEL

   Click here

3. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transaxle)

   Click here

4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)

   Click here

5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)

   Click here

6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

   Click here

7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for RHD)

   Click here

8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

   Click here

9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

   Click here

10. INSTALL NO. 3 BOX PANEL

    Click here

11. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

12. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.