HEATER FUEL PUMP(w/ Combustion Type Power Heater) INSTALLATION

PROCEDURE

1. INSTALL PIPING INSULATOR

   1. Install the 2 piping insulators as shown in the illustration.

      

      Table 1. Text in Illustration

      *a	Interior Side	*b	Front Side
      *c	Upper Side	*d	Lower Side
      *e	Slit	*f	90°

2. INSTALL HEATER PUMP ASSEMBLY

   1. Install the heater pump assembly with the nut.

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

   2. Connect the 2 fuel hoses as shown in the illustration.

      

   3. Using pliers, grip the claws of the clips and slide the 2 clips.

   4. Connect the connector.

      Table 2. Text in Illustration

      *1	Paint Mark	*2	Positioning Cutaway
      *a	2 to 10 mm (0.0788 to 0.393 in.)	-	-

3. INSTALL OUTER COWL TOP PANEL

   Click here

4. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for DPF)

   Click here

5. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

6. INSTALL COWL TOP VENTILATOR LOUVER LH

   Click here

7. INSTALL COWL TOP VENTILATOR LOUVER RH

   Click here

8. INSTALL HOOD TO COWL TOP SEAL

   Click here

9. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH

   Click here

10. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH

    Click here

11. INSTALL FRONT WIPER ARM HEAD CAP

    Click here

12. INSTALL NO. 1 ENGINE COVER

    Click here