HEADLIGHT CLEANER ACTUATOR COVER REMOVAL

PROCEDURE

  1. REMOVE TYPE1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH

    1. E281666

      Extend the type 1 headlight washer nozzle sub-assembly LH by hand.

      Note:

      Be careful not to damage the headlight washer actuator sub-assembly or type 1 headlight washer nozzle sub-assembly LH.

    2. Detach the claw and remove the type 1 headlight washer nozzle sub-assembly LH.

  2. REMOVE TYPE1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.