HOOD ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT HOOD SUB-ASSEMBLY

    1. Check that the clearance measurements of areas "a" through "f" are within each standard range.

      B371500E01
      Table 1. Standard Clearance

      Area

      Measurement

      Area

      Measurement

      a

      16.8 mm (0.661 in.)

      b

      8.9 to 12.9 mm (0.350 to 0.508 in.)

      c

      -1.2 to 1.8 mm (-0.0472 to 0.0709 in.)

      d

      2.5 to 5.2 mm (0.0984 to 0.205 in.)

      e

      3.5 to 6.5 mm (0.138 to 0.256 in.)

      f

      -2.0 to 2.0 mm (-0.0787 to 0.0787 in.)