PRE-COLLISION SYSTEM CANCEL SWITCH INSTALLATION

PROCEDURE

1. INSTALL PRE-COLLISION SYSTEM CANCEL SWITCH ASSEMBLY (w/o Stop And Start System)

   1. Engage the 2 claws to install the pre-collision system cancel switch assembly to the lower instrument panel finish panel.

2. INSTALL PRE-COLLISION SYSTEM CANCEL SWITCH ASSEMBLY (COMBINATION SWITCH ASSEMBLY) (w/ Stop And Start System)

   1. Engage the 2 claws to install the pre-collision system cancel switch assembly (combination switch assembly) to the lower instrument panel finish panel.

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here