CURTAIN SHIELD AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH

    1. Install the curtain shield airbag with the 17 new bolts.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

      Note:

      Do not twist the curtain shield airbag when installing it.

    2. Connect the connector.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

  2. INSTALL REAR SIDE NO. 1 AIR DUCT

    Click here

  3. INSTALL REAR SIDE NO. 2 AIR DUCT

    Click here

  4. INSTALL ROOF HEADLINING ASSEMBLY

    1. Install the roof headlining (Click here).