CAMSHAFT(w/o Glow Plug Controller) COMPONENTS
ILLUSTRATION
*1 |
EGR WITH COOLER PIPE ASSEMBLY |
*2 |
VACUUM TRANSMITTING HOSE |
*3 |
GASKET |
*4 |
NO. 2 WATER BY-PASS HOSE |
*5 |
NO. 2 OIL COOLER HOSE |
*6 |
VACUUM HOSE |
 |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
EGR VALVE (ELECTRIC EGR CONTROL VALVE ASSEMBLY) |
*2 |
ENGINE OIL LEVEL DIPSTICK |
*3 |
ENGINE OIL LEVEL DIPSTICK GUIDE |
*4 |
NO. 1 EGR COOLER BRACKET |
*5 |
NO. 4 WATER BY-PASS HOSE |
*6 |
O-RING |
*7 |
GASKET |
*8 |
NO. 3 WATER BY-PASS HOSE |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
★ |
Precoated part |
- |
- |
ILLUSTRATION
*1 |
INTAKE AIR CONNECTOR WITH DIESEL THROTTLE BODY |
*2 |
NO. 2 OIL COOLER HOSE |
*3 |
INTAKE AIR CONNECTOR GASKET |
*4 |
HOSE CLAMP |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
FUEL INLET PIPE SUB-ASSEMBLY |
*2 |
NO. 1 SUPPLY PUMP DRIVE COUPLING |
*3 |
NO. 2 FUEL HOSE |
*4 |
NOZZLE LEAKAGE PIPE ASSEMBLY |
*5 |
NOZZLE LEAKAGE PIPE SET CLAMP |
*6 |
SUPPLY PUMP ASSEMBLY |
*7 |
NO. 1 FUEL HOSE |
*8 |
O-RING |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
NO. 4 WATER BY-PASS HOSE |
*2 |
WATER BY-PASS PIPE SUB-ASSEMBLY |
*3 |
WATER BY-PASS HOSE |
*4 |
O-RING |
*5 |
OIL COOLER HOSE |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*A |
w/ No. 1 Engine Cover |
||
*1 |
CRANKSHAFT DAMPER SUB-ASSEMBLY |
*2 |
ENGINE COVER BRACKET |
*3 |
GENERATOR ASSEMBLY |
*4 |
GENERATOR BRACKET |
*5 |
VACUUM PUMP ASSEMBLY |
*6 |
V-RIBBED BELT TENSIONER ASSEMBLY |
*7 |
O-RING |
*8 |
TIMING CHAIN COVER OIL SEAL |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
 |
Precoated part |
- |
- |
ILLUSTRATION
*A |
w/o Stop And Start System |
- |
- |
*1 |
CAMSHAFT POSITION SENSOR |
*2 |
CYLINDER HEAD COVER SUB-ASSEMBLY |
*3 |
HARNESS BRACKET |
*4 |
NO. 2 CYLINDER HEAD COVER |
*5 |
GASKET |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
ILLUSTRATION
*1 |
HARNESS BRACKET |
*2 |
INLET WATER HOSE LH |
*3 |
NO. 2 TIMING CHAIN COVER |
*4 |
TIMING CHAIN COVER SUB-ASSEMBLY |
*5 |
ENGINE MOUNTING BRACKET RH |
*6 |
OIL PUMP GASKET |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*A |
w/ Stop And Start System |
- |
- |
*1 |
CAMSHAFT |
*2 |
CHAIN SUB-ASSEMBLY |
*3 |
CHAIN TENSIONER SLIPPER |
*4 |
NO. 1 CHAIN TENSIONER ASSEMBLY |
*5 |
NO. 1 CHAIN VIBRATION DAMPER |
*6 |
NO. 2 CAMSHAFT BEARING CAP |
*7 |
NO. 1 CAMSHAFT BEARING CAP |
*8 |
CAMSHAFT TIMING SPROCKET |
*9 |
CRANKSHAFT TIMING SPROCKET |
*10 |
SENSOR PLATE |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |