FRONT DRIVE SHAFT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. A005DRT

      Check that there is no excessive play in the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial directions of the inboard joint.

    4. A005CXKE16

      Check the boots for damage.

      Note

      Keep the drive shaft assembly level during inspection.

      Tech Tips

      For dimension (A), refer to the following values.

      Dimension (A)
      LH Side RH Side
      556.2 mm (1.82 ft.) 905.2 mm (2.97 ft.)