ACCELERATOR PEDAL ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON and turn the GTS on.

    3. Enter the following menus: Powertrain / Engine and ECT / Data List / Accel Sensor Out No. 1 and Accel Sensor Out No. 2.

      Powertrain > Engine and ECT > Data List

      Tester Display

      Accel Sensor Out No.1

      Accel Sensor Out No.2

    4. Read the value displayed on the GTS.

      Standard Voltage

      Accelerator Pedal Operation

      Accel Sensor Out No. 1

      Accel Sensor Out No. 2

      Released

      0.5 to 1.1 V

      1.2 to 2.0 V

      Depressed

      2.6 to 4.5 V

      3.4 to 4.75 V

      If the result is not as specified, check the accelerator pedal sensor assembly, wire harness or ECM.