ТОРМОЗ ПОВЫШАЮЩЕЙ ПЕРЕДАЧИ ПРОВЕРКА


  1. INSPECT PISTON OPERATION OF OVERDRIVE BRAKE


    1. B007PWT

      Place the O/D support assembly onto the direct clutch assembly.

    2. B007SC9

      Apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) into the oil passage as shown, and check that the O/D brake piston moves smoothly.

  2. INSPECT OVERDRIVE BRAKE RETURN SPRING SUB-ASSEMBLY


    1. B007U2G

      Measure the free length of the spring together with the spring seat.

      Standard free length
      17.03 mm (0.671 in.)

  3. INSPECT OVERDRIVE BRAKE CLUTCH DISC


    1. B007TUOE02

      Check if the sliding surfaces of the disc, the plate and the flange are worn or burnt. If necessary, replace them.

      Tech Tips

      If the lining of the disc is peeled off or discolored, or even if only a part of the printed numbers is corroded, replace all discs.