ENTRY AND START SYSTEM(for Start Function) PROBLEM SYMPTOMS TABLE

Tip:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

  • Inspect the fuses and relays related to the system before inspecting the suspected areas below.

  • If the problem occurs in certain locations or times of day, the possibility of wave interference is high.

  • If a malfunction occurred after optional components were installed at the dealer, check if there is wave interference from the components.

Table 1. Entry and Start System (for Start Function)

Symptom

Suspected Area

Link

Power source mode does not change to on (IG) or on (ACC)

Refer to "Power Source Mode does not Change to ON (IG and ACC)"

Click hereClick hereClick hereClick here

Power source mode does not change to on (IG)

Refer to "Power Source Mode does not Change to ON (IG)"

Click hereClick here

Power source mode does not change to on (ACC)

Refer to "Power Source Mode does not Change to ON (ACC)"

Click here

Engine does not start

Refer to "Engine does not Start"

Click hereClick hereClick hereClick here